|
|
|
|
Home | Products | Residential Products
Storm Windows: Interior/Sliding
The Slide-A-Way (SAW) series is designed to provide efficient, economical units, - with sliding panels for instant ventilation. Available in a wide variety of glazing materials up to 3/16”, - as well as a full range of window film. Custom colors, screens, glazing muntins, and between-glass blinds (remote operation) are typical options. All units are provided with an easily-installed, weather-stripped (4)-part track system. A reinforced sill track is available for special conditions.
Primary Uses: The (SAW) series is ideal for use with existing casement windows, or horizontally-sliding windows. By itself or used with the Magnetic One Lite (MOL) series, the (SAW) is frequently utilized for existing steel or aluminum projected, pivot, awning, fixed or hopper-type windows. Units can provide any multiple of panels, and can be stacked by using extruded tubular mullions.
|
|
 |
|
| Slide-A-Way (2) Panel (SAW-2) |
This double-track unit has a plain panel in the rear track, and an operating panel in the front track. The operating panel has full-length handle rails on both sides, allowing the unit to be fully reversible, with ventilation on either side. Screen panels can interchange with glass panels, or be mounted directly to the existing window.
|
S-2
Product Details |
|
|
|
|
|
|
|
| Slide-A-Way (3) Panel (SAW-3E) - Ends Active |
This double-track unit has a plain panel in the center of the rear track, and operating panels in each side of the front track. The operating panels have full length handle rails on both sides. The vertical overlap of the panels should match the sight-lines of the existing window. Screen panels can interchange with glass panels.
|
S-3
Product Details |
|
|
|
|
|
|
|
| Slide-A-Way (3) Panel (SAW-3C) - Center Active |
This double-track unit has a plain panel at each end of the rear track, and an operating panel in the center of the front track. The operating panel has full length handle rails on both sides. The vertical overlap of the panels should match the sight-lines of the existing window. Screen panels can interchange with glass panels.
|
S-4
Product Details |
|
|
|
|
|
|
|
| Slide-A-Way One Lite (SOL) - Lift Out Panel |
This single-panel unit utilizes the head and sill tracks of the standard (SAW) unit. Angle is provided as a stop on each jamb.
|
S-5
Product Details |
|
|
|
|
|
|
|
| Slide-A-Way One Lite (SAW-1/2) - Sliding Screen/Standard Sill |
This single-panel unit utilizes the head and sill tracks of the standard (SAW) unit. Angle is provided as a stop on each jamb.
|
S-6
Product Details |
|
|
|
|
|
|
|
| Slide-A-Way One Lite (SAW-1/2R) - Sliding Screen/Reinforced Sill |
This design adds a third track behind the (SAW) unit with a reinforced sill, to accommodate a self-storing 1/2 screen.
|
S-7
Product Details |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
